The EKET series earns its popularity in Singapore for one reason: it fits where other storage does not. The cubes are compact, the colours are varied, and the modular design lets a homeowner build a wall configuration that matches the exact dimensions of a tight hallway or a bedroom nook. As floor space in HDB flats shrinks, the ability to stack storage upward becomes a practical necessity rather than a design preference.
EKET cabinets are designed to be wall mounted. Each cabinet comes with a suspension rail that hooks onto a wall-fixed bracket. The system is straightforward in principle, but the details of the installation determine whether the finished wall of cubes stays put for years or begins to sag within months.
The Suspension Rail Does the Heavy Lifting
An EKET cabinet hangs from its suspension rail, and the rail is fixed to the wall. This means the wall carries the full weight of the cabinet and its contents, not the cabinet’s own base. The rail spreads that weight across its length, which is why fixing the rail correctly is the most important step in the entire process.
The rail must be anchored into a material that can hold the load. Concrete is ideal. A masonry anchor in a structural HDB wall will hold an EKET cabinet loaded with books or kitchen items without complaint. A hollow partition wall is a different challenge. The rail can still be used, but the anchors must be cavity fixings—spring toggles or snap toggles—that open behind the plasterboard and distribute the load across a wider area. Standard plastic plugs are not sufficient for a loaded cabinet on a hollow wall.
Planning the Configuration Around the Room
EKET’s modularity is its strength, but it can also lead to a configuration that looks busy and feels heavy. In a small room, a single row of cubes at eye level keeps the floor clear and the walls feeling open. In a hallway, a vertical stack of three or four cubes uses the height of the wall without protruding into the walking path.
The depth of the cabinet matters as much as the width. EKET cabinets come in different depths, and a deeper cabinet in a narrow room can make the space feel cramped. A shallower cabinet at eye level holds books and small items comfortably. A deeper cabinet lower down can hold larger items without dominating the room. Mixing depths in a single configuration is possible, but the rails must be aligned and level across the entire span.
Load Limits and What They Mean in Practice
IKEA states that the maximum load for a wall-hung EKET cabinet depends on the wall material. This is an honest admission that the cabinet itself is not the limiting factor; the wall and the anchors are. A single EKET cube loaded with paperbacks might weigh 15 kilograms. A row of four cubes, each loaded, could approach 60 kilograms. Spread across a rail with four or five well-placed anchors in concrete, that load is manageable. Concentrated on two anchors in a hollow wall, it is not.
The practical approach is to calculate the total loaded weight before installation and choose the number and type of anchors accordingly. More anchors, spaced evenly along the rail, reduce the load on each individual fixing and add redundancy. If one anchor loosens over time, the others share the burden.
The Installation Sequence for a Clean Finish
Mounting EKET cabinets is easier with two people. Assemble each cabinet on the floor first. Attach the suspension rail to the cabinet according to the instructions. Hold the cabinet against the wall at the desired position and mark the rail’s fixing holes. Remove the cabinet, drill the holes, insert the anchors, and fix the rail to the wall. Then lift the cabinet onto the rail. Check the level of each cabinet as you go. A laser level or a long spirit level across the full run prevents the staircase effect that appears when each cube is levelled independently.
If the wall is tiled, use a tile bit and a low drilling speed to avoid cracks. If the wall is painted plasterboard, use a toggle anchor and make sure the toggle opens fully behind the board before tightening.
FixFirst installs EKET configurations across Singapore, from single cabinets to full wall systems. We assess the wall and mount the rails so the finished storage is level, secure, and built to last.
Build your EKET wall with confidence. We handle the mounting, the anchors, and the levelling on HDB walls across Singapore. Book your EKET installation with us today over Whatsapp.
